Rotor Bolts - Stainless Steel

  • Stainless Steel
  • Made in Taiwan

Product Description

Set of 6 precision machined Torx T25 Stainless disc rotor mounting bolts.

Pre-applied Loose-proof Process

Through professional coating technology, the glue is permanently attached to the external or internal thread, which can fill the thread gap, reduce the material creep or material dynamic strain aging, and effectively prevent the fastener from loosening.

Corresponding Tool

Recommended tightening torque:2.0 - 4.0 N·m

Installation Steps

In order to ensure that the rotor is installed properly, please tighten the bolts in the numerical order as shown in the figure below.

Installation Notice

To ensure proper installation, please note the following

 

● To avoid stripped screw, please install with corresponding tools

● Avoid exceeding the recommended tightening torque:2.0 - 4.0 N

● Make sure the rotor is installed parallelly, remove dirt from the hub and the installation surface

 

※ If you have any questions, please consult the place of purchase or dealer

Check Out The Rotors Developed by PSB

The two-piece 3D Floating rotor is PSB's top solution for the most extreme and harsh conditions.
The highest level of performance and safety ensures that the bike keeps up with the rider on the road of pursuit and challenge.

3D FLOATING ROTOR - PR03

Check Before Every Ride

Before riding your bike, please check the following items

  •  

  •  ●  Is the rotor thinner than the recommended thickness ?

     ●  Is the installation direction correct (LOGO facing outwards) ?

     ●  Are front and rear rotors cracked or deformed ?

     ●  Does the screw or lock ring reach the recommended torque value?

     ●  When removing the rotor or cleaning the bike, the rotor should not be stained with oil

  •  

※ If you have any questions, please consult the place of purchase or dealer