AMH-08

  • Aluminum Alloy
  • Magnet*1
  • O-Ring *1
  • Spring Washer*1
  • Made in Taiwan

Product Description

  • One of the most common signal generating mechanisms for speed sensors, PSB’s sensor magnet is compatible with PSB and other rotor brands on the market.
  • Please Note:  that there must be a 4mm minimum clearance between the magnet and the speed sensor or the bicycle frame. If the gap is less than 4 mm, the magnet must be installed in the reverse direction, ensuring sufficient clearance between the components.

installation Tutorial:

Front Side Installation

First, install the magnet housing through the hole from the back of the rotor. Then slide the o-ring from the front down onto the rotor surface, and place the spring washer.

Back Side Installation

Please note that there must be a 4mm minimum clearance between the magnet and the speed sensor or the bicycle frame. If the gap is less than 4 mm, the magnet must be installed in the reverse direction, ensuring sufficient clearance between the components.

Corresponding Tool

Pressing down on the washer with an 8mm socket wrench will help secure the sensor magnet.

Compatible Rotors

  • PR03M
  • PR06M
  • PR07M
  • PR09M
  • PR08M
  • PR10M

COMPATIBLE WITH

3D Floating Plus Rotors
 ●  PR03M    ●PR06M

 

3D Floating Rotors
 ●  PR07M    ● PR09M

 

Standard Rotors
 ●  PR08M    ● PR10M