PF-F-1

  • Aluminum Alloy
  • Adapter *1
  • Bolts *2
  • Made in Taiwan

Product Description

This adpater allows the use PM calipers on a FM front fork.

140mm Rotors are compatible.

Install The Caliper On FM Front Forks

Recommended tightening torque:6 - 8 N·m

Setup Step

Follow the instructions

 

Step.1  Fix the adapter with the fork with M5 square head bolts.

Step.2  Slightly fix the caliper on the adapter with M6 bolts.

Step.3  In order to prevent the caliper from rubbing against the rotor, press the brake lever before the screws are tightened. Make sure that the caliper is clamped on the rotor, then fully tighten the M6 Bolts.

 

NOTICE : To prevent the caliper piston from protruding, please do not press the brake lever before the caliper is installed in the correct position

 

※ If you have any questions, please consult the place of purchase or dealer

You May Need The Following Accessories

This adpater allows the use PM calipers on a FM front fork.
160mm Rotors are compatible.

OTHER PM-FM ADAPTER

Check Before Every Ride

Before riding your bike, please check the following items

  •  

  • ●  Is the rotor thinner than the recommended thickness ? 

  •  ●  Is the installation direction correct (LOGO facing outwards) ?

     ●  Are front and rear rotors cracked or deformed ?

     ●  Does the screw or lock ring reach the recommended torque value?

     ●  When removing the rotor or cleaning the bike, the rotor should not be stained with oil

  •  

※ If you have any questions, please consult the place of purchase or dealer